Skip to content
Call Now

ADAS Calibration in Midland, TX

ADAS calibration aims the cameras and sensors behind your vehicle's driver-assistance features, so lane alerts, automatic braking and blind-spot warnings see the road correctly. HRP Collision calibrates ADAS after collision, bumper or windshield work at 1011 S Garfield St in Midland, for drivers across the Permian Basin.

Call (432) 888-1441
ADAS calibration for cameras and radar after a collision, HRP Collision
ADAS calibration for cameras and radar after a collision, HRP Collision

What Is ADAS Calibration?

ADAS calibration is the work of aiming the cameras and sensors that run a vehicle's driver-assistance features. ADAS stands for advanced driver-assistance systems: lane departure warnings, automatic emergency braking, adaptive cruise control and blind-spot alerts. Each depends on a camera or sensor seeing the road from an exact angle. If that angle changes, the system can misread what is ahead.

Calibration sets each sensor back to the aim the maker specifies. Some calibrations use targets placed at set distances in front of the vehicle. Others are done on a drive with a scan tool connected. Many vehicles need both, and we follow the maker's procedure for each.

Why ADAS Calibration Matters in Midland, TX

Drivers around Midland rely on these systems on long highway runs such as Interstate 20 and Loop 250. A lane alert or automatic braking system that is off aim can warn too late, or brake when nothing is there. Both are a safety risk at highway speed. A sensor that cannot see well may also switch the feature off without telling you.

Calibration also protects the repair itself. A collision repair is not complete until the vehicle's safety systems work as designed. Many makers require calibration after bumper, grille, mirror or windshield work. Skipping it can leave a hidden fault in an otherwise good repair.

When to Consider ADAS Calibration in Midland, TX

Plan on calibration after any collision repair that touched a bumper, grille, mirror or windshield. It is also called for when a sensor or its bracket is replaced. Structural repairs that change the vehicle's stance can affect sensor aim, too. We check what your maker requires as part of the estimate.

Ask for a check if a driver-assist light comes on, or a feature starts acting oddly. A lane alert that beeps for no reason or a braking alert with nothing ahead are signs. Even without a light, a minor bump can knock a sensor off aim. Call (432) 888-1441 and we will look at it.

Signs You Need ADAS Calibration

These signs suggest a driver-assist system needs calibration:

A driver-assist warning light came on

A fault light often follows bumper or windshield work.

My lane alert beeps when I am centered

A camera that is off aim reads the lane lines wrong.

My car braked hard for nothing

A misread from radar or camera needs a check.

My bumper or windshield was just replaced

The sensors behind them often need calibrating.

My blind-spot alert stopped working

Rear corner sensors can be knocked out of place.

How Our ADAS Calibration Works

Here is how ADAS calibration goes at our shop:

  • Step 1: Call (432) 888-1441 or request an estimate, and tell us your vehicle's year, make and model.
  • Step 2: Bring the vehicle in for a free estimate, and we check which systems it has and their status.
  • Step 3: We explain what we found and what the maker calls for before any work starts.
  • Step 4: Once you approve, we calibrate each system, verify it, and get you back on the road.

Camera Calibration

Forward cameras usually sit behind the windshield near the mirror. They read lane lines, signs and the vehicle ahead. After windshield or front-end work, the camera must be aimed again. We set it up with targets or a drive procedure, as the maker specifies.

Cameras in mirrors and bumpers are handled the same way. Surround-view systems may need several cameras calibrated together. We verify each one with a scan tool when the work is done. The system should then read the road the way it did from the factory.

Radar and Sensor Calibration

Radar sensors often sit behind the front bumper or grille. They measure the distance to the vehicle ahead for adaptive cruise and automatic braking. Rear corner sensors watch blind spots and cross traffic. A minor bump can move any of them.

After bumper or body work, we check and calibrate these sensors. Their brackets must also sit straight, which ties back to our Collision Repair and Frame Repair & 3D Alignment work. We confirm each system clears its faults. Then the vehicle goes back to you.

Why Midland Customers Choose HRP Collision

Our shop is an ADAS Calibration Center, holds I-CAR Gold Class recognition, and has ASE certified professionals on the team. We are part of the GM Collision Repair Network, and we have been in business for 20+ years. We follow the repair procedures your vehicle's maker sets. We speak English and Spanish.

Calibration is part of a complete repair, not an add-on we skip. We work directly with your insurer, use original parts, and help you arrange a loaner vehicle. Repair time depends on parts and insurance approval, so we keep you posted as both come in. Call (432) 888-1441 or stop by 1011 S Garfield St for a free estimate.

Get an Estimate

Tell us what happened to your vehicle. We'll inspect it for free and give you a clear estimate before starting.

Call (432) 888-1441

Reviews from Google

Trusted by Midland Drivers

Frequently Asked Questions

Frequently Asked Questions about ADAS Calibration

Collision damage can hide more than it shows. Our team inspects the whole vehicle and tells you what it needs.

How much does ADAS calibration cost?

The cost depends on which systems your vehicle has, which sensors were disturbed, and what your vehicle's maker calls for. Some vehicles need more than one calibration after a repair. We give you a free estimate before any work starts.

Why does my vehicle need calibration after a repair?

Cameras and sensors sit in bumpers, grilles, mirrors and windshields. When those parts are removed, replaced or moved, the sensor's aim can change. Calibration sets it back so the system sees the road as designed.

Which areas do you serve for ADAS calibration?

Our shop is at 1011 S Garfield St in Midland, TX 79701. We serve drivers from Midland, Greenwood, Odessa, West Odessa and the Midland-Odessa area.

Is ADAS calibration covered by a warranty?

Calibration done as part of our bodywork is covered by our warranty. We go over the written terms when your vehicle is ready.

What is ADAS?

ADAS stands for advanced driver-assistance systems. It covers features such as lane departure warnings, automatic emergency braking, adaptive cruise control and blind-spot alerts. They rely on cameras and sensors to read the road.

Can I skip calibration if no warning light is on?

A system can be off aim without showing a light. That is why the vehicle maker's repair procedures call for calibration after certain repairs. We follow those procedures.

ADAS Calibration Near Midland, TX

After collision, bumper or windshield work, HRP Collision provides ADAS calibration in Midland so your driver-assistance systems work as designed. Call (432) 888-1441 for a free estimate.

Our shop is at 1011 S Garfield St in Midland, south of Loop 250. Call ahead and tell us your vehicle's year, make and model.

1011 S Garfield St

Midland, TX 79701

(432) 888-1441

Mon - Fri: 8:30am - 6:00pm

Sat: 9:00am - 1:00pm

Sun: Closed

Get directions